Hotwav W10 Recovery and Fastboot Mode

Want to Boot Hotwav W10 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Hotwav W10 to Recovery Mode.

Hotwav W10 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Hotwav W10 to Recovery.

Also: Hotwav T5 Pro Recovery Mode and Fastboot Mode

Boot Hotwav W10 into Recovery Mode

Below are the methods using which you can boot Hotwav W10 into Recovery Mode.

Boot Hotwav W10 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the Power button as soon as you see the Hotwav Logo on the screen.
4. Release the Volume Up button when the device boots into Recovery Mode.

Boot Hotwav W10 into Recovery using ADB command

1. First of all, make sure you have installed Hotwav W10 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Hotwav W10 into Recovery Mode.

   adb reboot recovery

Boot Hotwav W10 into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Hotwav W10