HTC Wildfire E1 Plus Recovery and Fastboot Mode

Want to Boot HTC Wildfire E1 Plus into Recovery Mode? Then follow the instructions listed on this page to successfully Boot HTC Wildfire E1 Plus to Recovery Mode.

HTC Wildfire E1 Plus Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting HTC Wildfire E1 Plus to Recovery.

Also: HTC Desire 820G+ Dual SIM Recovery Mode and Fastboot Mode

Boot HTC Wildfire E1 Plus into Recovery Mode

Below are the methods using which you can boot HTC Wildfire E1 Plus into Recovery Mode.

Boot HTC Wildfire E1 Plus Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the HTC logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot HTC Wildfire E1 Plus into Recovery using ADB command

1. First of all, make sure you have installed HTC Wildfire E1 Plus USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot HTC Wildfire E1 Plus into Recovery Mode.

   adb reboot recovery

Boot HTC Wildfire E1 Plus into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot HTC Wildfire E1 Plus into Bootloader Mode or Fastboot Mode.

Boot HTC Wildfire E1 Plus Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Press and hold Volume Up and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
5. Now, your phone should boot into Fastboot Mode.

Boot HTC Wildfire E1 Plus Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset HTC Wildfire E1 Plus