Kyocera Katan Sumaho 2+ Recovery and Fastboot Mode

Want to Boot Kyocera Katan Sumaho 2+ into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Kyocera Katan Sumaho 2+ to Fastboot Mode or Recovery Mode.

Kyocera Katan Sumaho 2+ Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Kyocera Katan Sumaho 2+ Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Kyocera Katan Sumaho 2+ into Recovery Mode and Fastboot Mode.

Also: Kyocera Anshin KY-51B Recovery Mode and Fastboot Mode

Boot Kyocera Katan Sumaho 2+ into Recovery Mode

Below are the methods using which you can boot Kyocera Katan Sumaho 2+ into Recovery Mode.

Boot Kyocera Katan Sumaho 2+ Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Kyocera logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.
   

Boot Kyocera Katan Sumaho 2+ into Recovery using ADB command

1. First of all, make sure you have installed Kyocera Katan Sumaho 2+ USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Kyocera Katan Sumaho 2+ into Recovery Mode.

   adb reboot recovery

Boot Kyocera Katan Sumaho 2+ into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Kyocera Katan Sumaho 2+ into Bootloader Mode or Fastboot Mode.

Boot Kyocera Katan Sumaho 2+ Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Kyocera logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.
5. In the next step, select "Enter fastboot" using Volume keys and press the Power button to confirm.
6. Now, your phone should boot into Fastboot Mode.

Boot Kyocera Katan Sumaho 2+ Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Kyocera Katan Sumaho 2+