Lanix Alpha 1V Recovery and Fastboot Mode

Want to Boot Lanix Alpha 1V into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Lanix Alpha 1V to Recovery Mode.

Lanix Alpha 1V Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Lanix Alpha 1V to Recovery.

Also: Lanix Ilium X100 Recovery Mode and Fastboot Mode

Boot Lanix Alpha 1V into Recovery Mode

Below are the methods using which you can boot Lanix Alpha 1V into Recovery Mode.

Boot Lanix Alpha 1V Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. As soon as Android logo appears, Release the Power button.
4. Release the Volume Up button when the device boots into Recovery Mode.

Boot Lanix Alpha 1V into Recovery using ADB command

1. First of all, make sure you have installed Lanix Alpha 1V USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Lanix Alpha 1V into Recovery Mode.

   adb reboot recovery

Boot Lanix Alpha 1V into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Lanix Alpha 1V into Bootloader Mode or Fastboot Mode.

Boot Lanix Alpha 1V Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. As soon as Android logo appears, Release the Power button.
4. Release the Volume Up button when the device boots into Recovery Mode.
5. In the next step, select "Enter fastboot" using Volume keys and press the Power button to confirm.
6. Now, your phone should boot into Fastboot Mode.

Boot Lanix Alpha 1V Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Lanix Alpha 1V