Lenovo S898T Plus Recovery and Fastboot Mode

Want to Boot Lenovo S898T Plus into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Lenovo S898T Plus to Recovery Mode.

Lenovo S898T Plus Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Lenovo S898T Plus to Recovery.

Also: Lenovo S898T Recovery Mode and Fastboot Mode

Boot Lenovo S898T Plus into Recovery Mode

Below are the methods using which you can boot Lenovo S898T Plus into Recovery Mode.

Boot Lenovo S898T Plus Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up+ Power button together for a few seconds.
3. Release the keys as soon as you see the Lenovo logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot Lenovo S898T Plus into Recovery using ADB command

1. First of all, make sure you have installed Lenovo S898T Plus USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Lenovo S898T Plus into Recovery Mode.

   adb reboot recovery

Boot Lenovo S898T Plus into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Up and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Lenovo S898T Plus