Want to Boot LG G3 LS990 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot LG G3 LS990 to Fastboot Mode or Recovery Mode.
LG G3 LS990 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.
LG G3 LS990 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot LG G3 LS990 into Recovery Mode and Fastboot Mode.
Also: LG G Flex 2 LS996 Recovery Mode and Fastboot Mode
Boot LG G3 LS990 into Recovery Mode
Below are the methods using which you can boot LG G3 LS990 into Recovery Mode.
Boot LG G3 LS990 Recovery Mode using Hardware Buttons
- Power off your phone.
- Once the device is off, press and hold the Volume Down + Power button together for a few seconds.
- Release the keys as soon as you see the LG logo and wait for few seconds.
- Now, your phone should boot into Recovery Mode.
Boot LG G3 LS990 into Recovery using ADB command
- First of all, make sure you have installed LG G3 LS990 USB Driver and ADB and Fastboot Drivers on your Windows PC.
- Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
- Connect your device to PC and open Command Prompt (CMD).
- Enter the below command to boot LG G3 LS990 into Recovery Mode.
adb reboot recovery
Boot LG G3 LS990 into Download Mode
- Power off your Phone.
- Plug one end of the USB cable to PC and while holding the Volume Up connect the other end of the cable to your device.
- Release the Volume button once the device boots into Download Mode.
- To exit the Download Mode, press and hold the Power button until the device reboots.
Related Tutorials
How to Factory Reset LG G3 LS990
LEAVE A REPLY