LG K425 K10 (AT&T) Recovery and Fastboot Mode

Want to Boot LG K425 K10 (AT&T) into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot LG K425 K10 (AT&T) to Fastboot Mode or Recovery Mode.

LG K425 K10 (AT&T) Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

LG K425 K10 (AT&T) Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot LG K425 K10 (AT&T) into Recovery Mode and Fastboot Mode.

Also: LG VK815 G Pad X 8.3 Recovery Mode and Fastboot Mode

Boot LG K425 K10 (AT&T) into Factory Mode

1. First of all, power off your phone.
2. Press and hold Volume Down and Power buttons together for a few seconds.
3. When the LG logo appears, release the Power button while keep pressing the Volume Down and then press the Power button once more.
4. Release all the buttons once the device boots into Factory Mode. Use Volume keys to choose "Yes" and Power button to select the option (perform the operation).

Boot LG K425 K10 (AT&T) into Download Mode

1. Power off your Phone.
2. Plug one end of the USB cable to PC and while holding the Volume Up button connect the other end of the cable to your device.
3. Release the Volume button once the device boots into Download Mode.
4. To exit the Download Mode, press and hold the Power button until the device reboots.

Boot LG K425 K10 (AT&T) into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot LG K425 K10 (AT&T) into Bootloader Mode or Fastboot Mode.

Boot LG K425 K10 (AT&T) Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Plug one end of the USB cable to PC and while holding the Volume Down button connect the other end of the cable to your device.
3. Release the Volume button once the device boots into Fastboot Mode.

Boot LG K425 K10 (AT&T) Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset LG K425 K10 (AT&T)