Want to Boot Micromax D305 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Micromax D305 to Fastboot Mode or Recovery Mode.
Micromax D305 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.
Micromax D305 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Micromax D305 into Recovery Mode and Fastboot Mode.
Also: Micromax A101 Recovery Mode and Fastboot Mode
Boot Micromax D305 into Recovery Mode
Below are the methods using which you can boot Micromax D305 into Recovery Mode.
Boot Micromax D305 Recovery Mode using Hardware Buttons
- First of all, power off your phone.
- Now, press and hold the Volume Down and Power button together for a few seconds.
- Release the keys as soon as you see the Micromax logo and wait for few seconds.
- Now, press the Power button to enter into the Recovery Mode.
- While holding down the Power key press the Volume Up button at once.
Boot Micromax D305 into Recovery using ADB command
- First of all, make sure you have installed Micromax D305 USB Driver and ADB and Fastboot Drivers on your Windows PC.
- Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
- Connect your device to PC and open Command Prompt (CMD).
- Enter the below command to boot Micromax D305 into Recovery Mode.
adb reboot recovery
Boot Micromax D305 into Fastboot Mode / Bootloader Mode
Below are the methods using which you can boot Micromax D305 into Bootloader Mode or Fastboot Mode.
Boot Micromax D305 Bootloader Mode/Fastboot Mode using Hardware Buttons
- Power off your Phone.
- Now, press and hold the Volume Down and Power button together for a few seconds.
- Now, your phone should boot into Fastboot Mode.
Boot Micromax D305 Bootloader Mode/Fastboot Mode using ADB command
Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.
Open Command Prompt (CMD) on your PC and enter the below command.
adb reboot bootloader
Related Tutorials
How to Factory Reset Micromax D305
LEAVE A REPLY