Motorola Electrify M XT905 Recovery and Fastboot Mode

Want to Boot Motorola Electrify M XT905 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Motorola Electrify M XT905 to Fastboot Mode or Recovery Mode.

Motorola Electrify M XT905 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Motorola Electrify M XT905 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Motorola Electrify M XT905 into Recovery Mode and Fastboot Mode.

Also: Motorola XT711 Recovery Mode and Fastboot Mode

Boot Motorola Electrify M XT905 into Recovery Mode

Below are the methods using which you can boot Motorola Electrify M XT905 into Recovery Mode.

Boot Motorola Electrify M XT905 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up + Volume Down + Power button together for a few seconds.
3. Release the keys as soon as you see the Motorola logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot Motorola Electrify M XT905 into Recovery using ADB command

1. First of all, make sure you have installed Motorola Electrify M XT905 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Motorola Electrify M XT905 into Recovery Mode.

   adb reboot recovery

Boot Motorola Electrify M XT905 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Motorola Electrify M XT905 into Bootloader Mode or Fastboot Mode.

Boot Motorola Electrify M XT905 Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Press and hold the Volume Up + Power button together for a few seconds.
3. Now, your phone should boot into Fastboot Mode.

Boot Motorola Electrify M XT905 Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Motorola Electrify M XT905