Want to Boot Nokia 6 2018 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Nokia 6 2018 to Fastboot Mode or Recovery Mode.
Nokia 6 2018 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.
Nokia 6 2018 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Nokia 6 2018 into Recovery Mode and Fastboot Mode.
Also: Nokia 6.2 2019 Recovery Mode and Fastboot Mode
Boot Nokia 6 2018 into Recovery Mode
Below are the methods using which you can boot Nokia 6 2018 into Recovery Mode.
Boot Nokia 6 2018 Recovery Mode using Hardware Buttons
- First of all, power off your phone.
- Connect a USB cable to PC or Laptop.
- Hold the Volume Up + Power button for a few seconds and then connect the other end of the USB Cable to mobile.
- Now, your phone should boot into Recovery Mode.
Boot Nokia 6 2018 into Recovery using ADB command
- First of all, make sure you have installed Nokia 6 2018 USB Driver and ADB and Fastboot Drivers on your Windows PC.
- Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
- Connect your device to PC and open Command Prompt (CMD).
- Enter the below command to boot Nokia 6 2018 into Recovery Mode.
adb reboot recovery
Boot Nokia 6 2018 into Fastboot Mode / Bootloader Mode
Below are the methods using which you can boot Nokia 6 2018 into Bootloader Mode or Fastboot Mode.
Boot Nokia 6 2018 Bootloader Mode/Fastboot Mode using Hardware Buttons
- Power off your Phone.
- Connect a USB cable to PC or Laptop.
- Hold the Volume Down + Power button for a few seconds and then connect the other end of the USB Cable to mobile.
- Now, your phone should boot into Fastboot Mode.
Boot Nokia 6 2018 Bootloader Mode/Fastboot Mode using ADB command
Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.
Open Command Prompt (CMD) on your PC and enter the below command.
adb reboot bootloader
Related Tutorials
How to Factory Reset Nokia 6 2018
LEAVE A REPLY