Want to Boot Nokia X7 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Nokia X7 to Fastboot Mode or Recovery Mode.
Nokia X7 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.
Nokia X7 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Nokia X7 into Recovery Mode and Fastboot Mode.
Also: Nokia N1 Recovery Mode and Fastboot Mode
Boot Nokia X7 into Recovery Mode
Below are the methods using which you can boot Nokia X7 into Recovery Mode.
Boot Nokia X7 Recovery Mode using Hardware Buttons
- First of all, power off your phone.
- Connect a USB cable to PC or Laptop.
- Hold the Volume Up + Power button for a few seconds and then connect the other end of the USB Cable to mobile.
- Release the Power key as soon as you see the Android logo and wait for few seconds.
- But keep holding the Volume Up button to enter into the Recovery Mode.
Boot Nokia X7 into Recovery using ADB command
- First of all, make sure you have installed Nokia X7 USB Driver and ADB and Fastboot Drivers on your Windows PC.
- Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
- Connect your device to PC and open Command Prompt (CMD).
- Enter the below command to boot Nokia X7 into Recovery Mode.
adb reboot recovery
Boot Nokia X7 into Fastboot Mode / Bootloader Mode
Below are the methods using which you can boot Nokia X7 into Bootloader Mode or Fastboot Mode.
Boot Nokia X7 Bootloader Mode/Fastboot Mode using Hardware Buttons
- Power off your Phone.
- Connect a USB cable to PC or Laptop.
- Hold the Volume Down + Power button for a few seconds and then connect the other end of the USB Cable to mobile.
- Now, your phone should boot into Fastboot Mode.
Boot Nokia X7 Bootloader Mode/Fastboot Mode using ADB command
Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.
Open Command Prompt (CMD) on your PC and enter the below command.
adb reboot bootloader
LEAVE A REPLY