Panasonic ToughPad FZ-N1 Flat Recovery and Fastboot Mode

Want to Boot Panasonic ToughPad FZ-N1 Flat into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Panasonic ToughPad FZ-N1 Flat to Recovery Mode.

Panasonic ToughPad FZ-N1 Flat Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Panasonic ToughPad FZ-N1 Flat to Recovery.

Also: Panasonic Eluga Z1 Recovery Mode and Fastboot Mode

Boot Panasonic ToughPad FZ-N1 Flat into Recovery Mode

Below are the methods using which you can boot Panasonic ToughPad FZ-N1 Flat into Recovery Mode.

Boot Panasonic ToughPad FZ-N1 Flat Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Fastboot Mode on the screen.
   
4. In the next step, select "Recovery Mode" using Volume keys and press the Power button to confirm.
5. If the Android Bot with Red exclamation pops up, then press Volume Up and Power buttons together at once.
6. Now, your phone should boot into Recovery Mode.

Boot Panasonic ToughPad FZ-N1 Flat into Recovery using ADB command

1. First of all, make sure you have installed Panasonic ToughPad FZ-N1 Flat USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Panasonic ToughPad FZ-N1 Flat into Recovery Mode.

   adb reboot recovery

Related Tutorials

How to Factory Reset Panasonic ToughPad FZ-N1 Flat