QMobile S6 Recovery and Fastboot Mode

Want to Boot QMobile S6 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot QMobile S6 to Recovery Mode.

QMobile S6 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting QMobile S6 to Recovery.

Also: QMobile A1 Recovery Mode and Fastboot Mode

Boot QMobile S6 into Recovery Mode

Below are the methods using which you can boot QMobile S6 into Recovery Mode.

Boot QMobile S6 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the Power button as soon as you see the QMobile Logo on the screen.
4. But keep holding the Volume Up button to enter into the Recovery Mode.
   

Boot QMobile S6 into Recovery using ADB command

1. First of all, make sure you have installed QMobile S6 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot QMobile S6 into Recovery Mode.

   adb reboot recovery

Boot QMobile S6 into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the Power button as soon as you see the QMobile Logo on the screen.
4. But keep holding the Volume Down key to enter into the Factory Mode.
   

Related Tutorials

How to Factory Reset QMobile S6