Sharp Aquos V7 Plus Recovery and Fastboot Mode

Want to Boot Sharp Aquos V7 Plus into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Sharp Aquos V7 Plus to Fastboot Mode or Recovery Mode.

Sharp Aquos V7 Plus Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Sharp Aquos V7 Plus Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Sharp Aquos V7 Plus into Recovery Mode and Fastboot Mode.

Also: Sharp Aquos R8 Recovery Mode and Fastboot Mode

Boot Sharp Aquos V7 Plus into Recovery Mode

Below are the methods using which you can boot Sharp Aquos V7 Plus into Recovery Mode.

Boot Sharp Aquos V7 Plus Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Connect a USB cable to PC or Laptop.
3. Then connect the other end of the USB Cable to mobile and Hold the Volume Up + Power button for a few seconds.
   
4. Release the keys as soon as you see the Sharp logo and wait for few seconds.
5. If Android Robot appears, press the Volume Up and Power button.
   
6. Now, your phone should boot into Recovery Mode.

Boot Sharp Aquos V7 Plus into Recovery using ADB command

1. First of all, make sure you have installed Sharp Aquos V7 Plus USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Sharp Aquos V7 Plus into Recovery Mode.

   adb reboot recovery

Boot Sharp Aquos V7 Plus into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Sharp Aquos V7 Plus into Bootloader Mode or Fastboot Mode.

Boot Sharp Aquos V7 Plus Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Connect a USB cable to PC or Laptop.
3. Then connect the other end of the USB Cable to mobile and Hold the Volume Up + Power button for a few seconds.
   
4. Release the keys as soon as you see the Sharp logo and wait for few seconds.
5. If Android Robot appears, press the Volume Up and Power button.
   
6. Now, your phone should boot into Recovery Mode.
7. In the next step, select "Enter fastboot" using Volume keys and press the Power button to confirm.
8. Now, your phone should boot into Fastboot Mode.

Boot Sharp Aquos V7 Plus Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Sharp Aquos V7 Plus