SoftBank ZTE 003z Recovery and Fastboot Mode

Want to Boot SoftBank ZTE 003z into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot SoftBank ZTE 003z to Fastboot Mode or Recovery Mode.

SoftBank ZTE 003z Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

SoftBank ZTE 003z Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot SoftBank ZTE 003z into Recovery Mode and Fastboot Mode.

Also: SoftBank 740SC Recovery Mode and Fastboot Mode

Boot SoftBank ZTE 003z into Recovery Mode

Below are the methods using which you can boot SoftBank ZTE 003z into Recovery Mode.

Boot SoftBank ZTE 003z Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Down and Power button together for a few seconds.
3. Release the keys as soon as you see the Android logo and wait for few seconds.
4. In this mode, select Recovery by using the Volume key to navigate and the Power button to accept it.
5. Now, your phone should boot into Recovery Mode.

Boot SoftBank ZTE 003z into Recovery using ADB command

1. First of all, make sure you have installed SoftBank ZTE 003z USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot SoftBank ZTE 003z into Recovery Mode.

   adb reboot recovery

Boot SoftBank ZTE 003z into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot SoftBank ZTE 003z into Bootloader Mode or Fastboot Mode.

Boot SoftBank ZTE 003z Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Now, press and hold the Volume Down and Power button together for a few seconds.
3. Now, your phone should boot into Fastboot Mode.

Boot SoftBank ZTE 003z Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset SoftBank ZTE 003z