Teclast P10SE Recovery and Fastboot Mode

Want to Boot Teclast P10SE into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Teclast P10SE to Fastboot Mode or Recovery Mode.

Teclast P10SE Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Teclast P10SE Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Teclast P10SE into Recovery Mode and Fastboot Mode.

Also: Teclast P25 Recovery Mode and Fastboot Mode

Boot Teclast P10SE into Recovery Mode

Below are the methods using which you can boot Teclast P10SE into Recovery Mode.

Boot Teclast P10SE Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Press and hold the Volume Down + Power button together for a few seconds.
3. Release the Power button as soon as you see the Teclast Logo on the screen.
4. Release the Volume Down button when the device boots into Recovery Mode.

Boot Teclast P10SE into Recovery using ADB command

1. First of all, make sure you have installed Teclast P10SE USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Teclast P10SE into Recovery Mode.

   adb reboot recovery

Boot Teclast P10SE into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Teclast P10SE into Bootloader Mode or Fastboot Mode.

Boot Teclast P10SE Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Press and hold the Volume Down + Power button together for a few seconds.
3. Release the Power button as soon as you see the Teclast Logo on the screen.
4. Release the Volume Down button when the device boots into Recovery Mode.

1. In the next step, select "Enter fastboot" using Volume keys and press the Power button to confirm.
2. Now, your phone should boot into Fastboot Mode.

Boot Teclast P10SE Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Teclast P10SE