Teclast P30 Air Recovery and Fastboot Mode

Want to Boot Teclast P30 Air into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Teclast P30 Air to Fastboot Mode or Recovery Mode.

Teclast P30 Air Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Teclast P30 Air Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Teclast P30 Air into Recovery Mode and Fastboot Mode.

Also: Teclast P30HD Recovery Mode and Fastboot Mode

Boot Teclast P30 Air into Recovery Mode

Below are the methods using which you can boot Teclast P30 Air into Recovery Mode.

Boot Teclast P30 Air Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Down and Power button together for a few seconds.
3. Release the Power key as soon as you see the Teclast Logo on the screen.
4. But keep holding the Volume Down button to enter into the Recovery Mode.

Boot Teclast P30 Air into Recovery using ADB command

1. First of all, make sure you have installed Teclast P30 Air USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Teclast P30 Air into Recovery Mode.

   adb reboot recovery

Boot Teclast P30 Air into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Teclast P30 Air into Bootloader Mode or Fastboot Mode.

Boot Teclast P30 Air Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Now, press and hold the Volume Down and Power button together for a few seconds.
3. Release the Power key as soon as you see the Teclast Logo on the screen.
4. But keep holding the Volume Down button to enter into the Recovery Mode.
5. In the next step, select "Enter fastboot" using Volume keys and press the Power button to confirm.
6. Now, your phone should boot into Fastboot Mode.

Boot Teclast P30 Air Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Teclast P30 Air