Tecno P3 Recovery and Fastboot Mode

Want to Boot Tecno P3 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Tecno P3 to Recovery Mode.

Tecno P3 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Tecno P3 to Recovery.

Also: Tecno L8 Plus Recovery Mode and Fastboot Mode

Boot Tecno P3 into Recovery Mode

Below are the methods using which you can boot Tecno P3 into Recovery Mode.

Boot Tecno P3 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the Power key as soon as you see the Tecno logo and wait for few seconds.
4. As soon as Android logo appears, Release the Volume Up key.
   
5. Now, press the Volume Up + Power button to enter into the Recovery Mode.
   

Boot Tecno P3 into Recovery using ADB command

1. First of all, make sure you have installed Tecno P3 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Tecno P3 into Recovery Mode.

   adb reboot recovery

Related Tutorials

How to Factory Reset Tecno P3