Tecno Spark Power 2 Recovery and Fastboot Mode

Want to Boot Tecno Spark Power 2 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Tecno Spark Power 2 to Fastboot Mode or Recovery Mode.

Tecno Spark Power 2 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Tecno Spark Power 2 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Tecno Spark Power 2 into Recovery Mode and Fastboot Mode.

Also: Tecno i3 Recovery Mode and Fastboot Mode

Boot Tecno Spark Power 2 into Recovery Mode

Below are the methods using which you can boot Tecno Spark Power 2 into Recovery Mode.

Boot Tecno Spark Power 2 Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Release the Power key as soon as you see the Tecno logo and wait for few seconds.
4. As soon as Android logo appears, Release the Volume Up key.
   
5. Now, press the Volume Up + Power button to enter into the Recovery Mode.
   

Boot Tecno Spark Power 2 into Recovery using ADB command

1. First of all, make sure you have installed Tecno Spark Power 2 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Tecno Spark Power 2 into Recovery Mode.

   adb reboot recovery

Boot Tecno Spark Power 2 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Tecno Spark Power 2 into Bootloader Mode or Fastboot Mode.

Boot Tecno Spark Power 2 Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Android logo and wait for few seconds.
4. Now, press the Volume Up + Power button to enter into the Fastboot Mode.
   

Boot Tecno Spark Power 2 Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Tecno Spark Power 2