Umidigi S3 Pro Recovery and Fastboot Mode

Want to Boot Umidigi S3 Pro into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Umidigi S3 Pro to Fastboot Mode or Recovery Mode.

Umidigi S3 Pro Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Umidigi S3 Pro Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Umidigi S3 Pro into Recovery Mode and Fastboot Mode.

Also: Umidigi One Pro Recovery Mode and Fastboot Mode

Boot Umidigi S3 Pro into Recovery Mode

Below are the methods using which you can boot Umidigi S3 Pro into Recovery Mode.

Boot Umidigi S3 Pro Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Release the Power key as soon as you see the Umidigi logo and wait for few seconds.
   
4. If Android Robot appears, press the Volume Up and Power button.
5. Now, your phone should boot into Recovery Mode.

Boot Umidigi S3 Pro into Recovery using ADB command

1. First of all, make sure you have installed Umidigi S3 Pro USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Umidigi S3 Pro into Recovery Mode.

   adb reboot recovery

Boot Umidigi S3 Pro into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Umidigi S3 Pro into Bootloader Mode or Fastboot Mode.

Boot Umidigi S3 Pro Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Now, press and hold the Volume Up and Power button together for a few seconds.
3. Release the Power key as soon as you see the Umidigi logo and wait for few seconds.
4. Now, your phone should boot into Fastboot Mode.

Boot Umidigi S3 Pro Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Boot Umidigi S3 Pro into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Umidigi S3 Pro