VKworld VK500 Recovery and Fastboot Mode

Want to Boot VKworld VK500 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot VKworld VK500 to Recovery Mode.

VKworld VK500 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting VKworld VK500 to Recovery.

Also: VKworld VK1000 Recovery Mode and Fastboot Mode

Boot VKworld VK500 into Recovery Mode

Below are the methods using which you can boot VKworld VK500 into Recovery Mode.

Boot VKworld VK500 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the VKworld logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot VKworld VK500 into Recovery using ADB command

1. First of all, make sure you have installed VKworld VK500 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot VKworld VK500 into Recovery Mode.

   adb reboot recovery

Related Tutorials

How to Factory Reset VKworld VK500