Wiko Power U20 Recovery and Fastboot Mode

Want to Boot Wiko Power U20 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Wiko Power U20 to Fastboot Mode or Recovery Mode.

Wiko Power U20 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Wiko Power U20 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Wiko Power U20 into Recovery Mode and Fastboot Mode.

Also: Wiko Y51 Recovery Mode and Fastboot Mode

Boot Wiko Power U20 into Recovery Mode

Below are the methods using which you can boot Wiko Power U20 into Recovery Mode.

Boot Wiko Power U20 Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release the Power button as soon as you see the Wiko Logo on the screen.
4. But keep holding the Volume Up button to enter into the Recovery Mode.

Boot Wiko Power U20 into Recovery using ADB command

1. First of all, make sure you have installed Wiko Power U20 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Wiko Power U20 into Recovery Mode.

   adb reboot recovery

Boot Wiko Power U20 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Wiko Power U20 into Bootloader Mode or Fastboot Mode.

Boot Wiko Power U20 Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release the Power button as soon as you see the Wiko Logo on the screen.
4. But keep holding the Volume Up button to enter into the Recovery Mode.
5. In the next step, select "Enter fastboot" using Volume keys and press the Power button to confirm.
6. Now, your phone should boot into Fastboot Mode.

Boot Wiko Power U20 Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Wiko Power U20