ZTE N9100 Boost Force Recovery and Fastboot Mode

Want to Boot ZTE N9100 Boost Force into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot ZTE N9100 Boost Force to Fastboot Mode or Recovery Mode.

ZTE N9100 Boost Force Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

ZTE N9100 Boost Force Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot ZTE N9100 Boost Force into Recovery Mode and Fastboot Mode.

Also: ZTE Rapido LTE Z932L Recovery Mode and Fastboot Mode

Boot ZTE N9100 Boost Force into Recovery Mode

Below are the methods using which you can boot ZTE N9100 Boost Force into Recovery Mode.

Boot ZTE N9100 Boost Force Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Recovery Mode from the list of Boot Options and press Volume Down to confirm.
5. If the Android Bot with Red exclamation pops up, then press the Power Key button for a few seconds. Then press the Volume Up button once.
6. Now, your phone should boot into Recovery Mode.

Boot ZTE N9100 Boost Force into Recovery using ADB command

1. First of all, make sure you have installed ZTE N9100 Boost Force USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot ZTE N9100 Boost Force into Recovery Mode.

   adb reboot recovery

Boot ZTE N9100 Boost Force into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot ZTE N9100 Boost Force into Bootloader Mode or Fastboot Mode.

Boot ZTE N9100 Boost Force Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Press and hold the Volume Up and Power buttons together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
5. Now, your phone should boot into Fastboot Mode.

Boot ZTE N9100 Boost Force Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Boot ZTE N9100 Boost Force into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset ZTE N9100 Boost Force