Alcatel AT&T Trek HD 8.0″ Recovery and Fastboot Mode

Want to Boot Alcatel AT&T Trek HD 8.0″ into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Alcatel AT&T Trek HD 8.0″ to Recovery Mode.

Alcatel AT&T Trek HD 8.0″ Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Alcatel AT&T Trek HD 8.0″ to Recovery.

Also: Alcatel Smart Tab 7 Recovery Mode and Fastboot Mode

Boot Alcatel AT&T Trek HD 8.0″ into Recovery Mode

Below are the methods using which you can boot Alcatel AT&T Trek HD 8.0″ into Recovery Mode.

Boot Alcatel AT&T Trek HD 8.0″ Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up + Power button together for a few seconds.
3. Release the Power button as soon as you see the Alcatel Logo on the screen.
4. Release the Volume Up button when the device boots into Recovery Mode.

Boot Alcatel AT&T Trek HD 8.0″ into Recovery using ADB command

1. First of all, make sure you have installed Alcatel AT&T Trek HD 8.0″ USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Alcatel AT&T Trek HD 8.0″ into Recovery Mode.

   adb reboot recovery

Boot Alcatel AT&T Trek HD 8.0″ into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Alcatel AT&T Trek HD 8.0″ into Bootloader Mode or Fastboot Mode.

Boot Alcatel AT&T Trek HD 8.0″ Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Plug one end of the USB cable to PC and while holding the Volume Down button connect the other end of the cable to your device.
3. Now, your phone should boot into Fastboot Mode.

Boot Alcatel AT&T Trek HD 8.0″ Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Boot Alcatel AT&T Trek HD 8.0″ into Download Mode

1. Power off your Phone.
2. Plug one end of the USB cable to PC and while holding the Volume Down + Volume Up button connect the other end of the cable to your device.
3. Release the Volume button once the device boots into Download Mode.
4. To exit the Download Mode, press and hold the Power button until the device reboots.

Related Tutorials

How to Factory Reset Alcatel AT&T Trek HD 8.0″