Huawei MatePad SE WiFi Recovery and Fastboot Mode

Want to Boot Huawei MatePad SE WiFi into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Huawei MatePad SE WiFi to Fastboot Mode or Recovery Mode.

Huawei MatePad SE WiFi Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Huawei MatePad SE WiFi Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Huawei MatePad SE WiFi into Recovery Mode and Fastboot Mode.

Also: Huawei P50 Pocket Recovery Mode and Fastboot Mode

Boot Huawei MatePad SE WiFi into Recovery Mode

Below are the methods using which you can boot Huawei MatePad SE WiFi into Recovery Mode.

Boot Huawei MatePad SE WiFi Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the Power button as soon as you see the Huawei Logo on the screen.
4. But keep holding the Volume Up button to enter into the Recovery Mode.

Boot Huawei MatePad SE WiFi into Recovery using ADB command

1. First of all, make sure you have installed Huawei MatePad SE WiFi USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Huawei MatePad SE WiFi into Recovery Mode.

   adb reboot recovery

Boot Huawei MatePad SE WiFi into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Huawei MatePad SE WiFi into Bootloader Mode or Fastboot Mode.

Boot Huawei MatePad SE WiFi Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Plug one end of the USB cable to PC and while holding the Volume Down button connect the other end of the cable to your device.
3. Now, your phone should boot into Fastboot Mode.

Boot Huawei MatePad SE WiFi Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Boot Huawei MatePad SE WiFi Download Mode

1. Power off your Phone.
2. Now, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the Power button as soon as you see the Huawei Logo on the screen.
4. But keep holding the Volume Up button to enter into the Recovery Mode.
5. In the next step Select the Update mode here.
6. Pick the USB Update mode from the menu.
7. Now, your phone should boot into Download Mode.

Related Tutorials

How to Factory Reset Huawei MatePad SE WiFi