Huawei P Smart 2019 Recovery and Fastboot Mode

Want to Boot Huawei P Smart 2019 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Huawei P Smart 2019 to Fastboot Mode or Recovery Mode.

Huawei P Smart 2019 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Huawei P Smart 2019 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Huawei P Smart 2019 into Recovery Mode and Fastboot Mode.

Also: Huawei Mate 20 Lite Recovery Mode and Fastboot Mode

Boot Huawei P Smart 2019 into Recovery Mode

Below are the methods using which you can boot Huawei P Smart 2019 into Recovery Mode.

Boot Huawei P Smart 2019 Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release the keys as soon as you see the Huawei logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot Huawei P Smart 2019 into Recovery using ADB command

1. First of all, make sure you have installed Huawei P Smart 2019 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Huawei P Smart 2019 into Recovery Mode.

   adb reboot recovery

Boot Huawei P Smart 2019 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Huawei P Smart 2019 into Bootloader Mode or Fastboot Mode.

Boot Huawei P Smart 2019 Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Plug one end of the USB cable to PC and while holding the Volume Down button connect the other end of the cable to your device.
3. Now, your phone should boot into Fastboot Mode.

Boot Huawei P Smart 2019 Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Boot Huawei P Smart 2019 Download Mode

1. Power off your Phone.
2. Press and hold Volume Down + Volume Up buttons together for a few seconds.
3. Plug one end of the USB cable to PC and while holding these Keys connect the other end of the cable to your device.
4. Release the Volume buttons once the device boots into Download Mode.
5. To exit the Download Mode, press and hold the Power button until the device reboots.

Related Tutorials

How to Factory Reset Huawei P Smart 2019