Rivo Rhythm RX80 Recovery and Fastboot Mode

Want to Boot Rivo Rhythm RX80 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Rivo Rhythm RX80 to Recovery Mode.

Rivo Rhythm RX80 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Rivo Rhythm RX80 to Recovery.

Also: Rivo Phantom PZ20 Recovery Mode and Fastboot Mode

Boot Rivo Rhythm RX80 into Recovery Mode

Below are the methods using which you can boot Rivo Rhythm RX80 into Recovery Mode.

Boot Rivo Rhythm RX80 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release the Power key as soon as you see the Rivo logo and wait for few seconds.
4. But keep holding the Volume Up key to enter into the Recovery Mode.

Boot Rivo Rhythm RX80 into Recovery using ADB command

1. First of all, make sure you have installed Rivo Rhythm RX80 USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Rivo Rhythm RX80 into Recovery Mode.

   adb reboot recovery

Boot Rivo Rhythm RX80 into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.

Related Tutorials

How to Factory Reset Rivo Rhythm RX80