Want to Boot Samsung Galaxy J3 Luna Pro into Recovery Mode or Download Mode? Then follow the instructions listed on this page to successfully Boot Samsung Galaxy J3 Luna Pro to Download Mode or Recovery Mode.
Samsung Galaxy J3 Luna Pro Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.
Table of Contents
Samsung Galaxy J3 Luna Pro Download Mode allows its user to flash Stock Firmware or Custom Recovery like TWRP, CWM, Philz, etc. on to the device using Odin Flash Tool. Let’s now proceed and see How to reboot Samsung Galaxy J3 Luna Pro into Recovery Mode and Download Mode.
Boot Samsung Galaxy J3 Luna Pro into Recovery Mode
Below are the methods using which you can boot Samsung Galaxy J3 Luna Pro into Recovery Mode.
- Power off your phone.
- Once the device is off, press and hold the Volume Up + Home + Power button together for a few seconds.
- Release the keys as soon as you see the Samsung logo and wait for few seconds.
- Now, your phone should boot into Recovery Mode.
Boot Samsung Galaxy J3 Luna Pro into Recovery using ADB command
- First of all, make sure you have installed Samsung Galaxy J3 Luna Pro USB Driver and ADB and Fastboot Drivers on your Windows PC.
- Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
- Connect your device to PC and open Command Prompt (CMD).
- Enter the below command to boot Samsung Galaxy J3 Luna Pro into Recovery Mode.
adb reboot recovery
Boot Samsung Galaxy J3 Luna Pro into Download Mode / Odin Mode
- Power off your Phone.
- Press and hold Volume Down + Home + Power button together for a few seconds.
- You should see the Warning Screen with two options – Volume Up to Continue and Volume Down to Cancel and restart the phone.
- Press Volume Up to boot into Download Mode/Odin Mode.