Ulefone Armor X Recovery and Fastboot Mode

Want to Boot Ulefone Armor X into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Ulefone Armor X to Fastboot Mode or Recovery Mode.

Ulefone Armor X Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Ulefone Armor X Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Ulefone Armor X into Recovery Mode and Fastboot Mode.

Also: Ulefone Note 8P Recovery Mode and Fastboot Mode

Boot Ulefone Armor X into Recovery Mode

Below are the methods using which you can boot Ulefone Armor X into Recovery Mode.

Boot Ulefone Armor X Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Recovery Mode from the list of Boot Options and press Volume Down to confirm.
5. If the Android Bot with Red exclamation pops up, then press Volume Up and Power buttons together at once.
6. Now, your phone should boot into Recovery Mode.
   

Boot Ulefone Armor X into Recovery using ADB command

1. First of all, make sure you have installed Ulefone Armor X USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot Ulefone Armor X into Recovery Mode.

   adb reboot recovery

Boot Ulefone Armor X into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Ulefone Armor X into Bootloader Mode or Fastboot Mode.

Boot Ulefone Armor X Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Press and hold Volume Up and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
5. Now, your phone should boot into Fastboot Mode.

Boot Ulefone Armor X Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.

Open Command Prompt (CMD) on your PC and enter the below command.

adb reboot bootloader

Related Tutorials

How to Factory Reset Ulefone Armor X