Want to Boot Vivo iQOO Z6 into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot Vivo iQOO Z6 to Fastboot Mode or Recovery Mode.
Vivo iQOO Z6 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.
Table of Contents
- 1 Boot Vivo iQOO Z6 into Recovery Mode
- 2 Boot Vivo iQOO Z6 into Fastboot Mode / Bootloader Mode
Vivo iQOO Z6 Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot Vivo iQOO Z6 into Recovery Mode and Fastboot Mode.
Boot Vivo iQOO Z6 into Recovery Mode
Below are the methods using which you can boot Vivo iQOO Z6 into Recovery Mode.
- Power off your phone.
- Once the device is off, press and hold the Volume Up and Power button together for a few seconds.
- Release all the keys when the device boots into Fastboot Mode.
- Now choose "Recovery Mode" using Volume keys, and select it using the Power button.
- Now, your device should boot into the Recovery Mode.
Boot Vivo iQOO Z6 into Recovery using ADB command
- First of all, make sure you have installed Vivo iQOO Z6 USB Driver and ADB and Fastboot Drivers on your Windows PC.
- Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
- Connect your device to PC and open Command Prompt (CMD).
- Enter the below command to boot Vivo iQOO Z6 into Recovery Mode.
adb reboot recovery
Boot Vivo iQOO Z6 into Fastboot Mode / Bootloader Mode
Below are the methods using which you can boot Vivo iQOO Z6 into Bootloader Mode or Fastboot Mode.
- Power off your Phone.
- Press and hold the Volume Up + Power button together for a few seconds.
- Now, your phone should boot into the Fastboot Mode.
- In Fastboot Mode, use Volume keys to navigate and Power button to select the option.
Boot Vivo iQOO Z6 Bootloader Mode/Fastboot Mode using ADB command
Assuming ADB and Fastboot Drivers installed on PC, and USB Debugging enabled on Phone enter the below command after connecting it to PC.
Open Command Prompt (CMD) on your PC and enter the below command.
adb reboot bootloader