ZTE Director Recovery and Fastboot Mode

Want to Boot ZTE Director into Recovery Mode or Fastboot Mode or Bootloader Mode? Then follow the instructions listed on this page to successfully Boot ZTE Director to Fastboot Mode or Recovery Mode.

ZTE Director Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

ZTE Director Fastboot Mode allows the user to flash Custom Image files and Custom Recovery like TWRP, CWM, Philz, etc. on to the device. Let’s now proceed and see How to reboot ZTE Director into Recovery Mode and Fastboot Mode.

Also: ZTE V857 Recovery Mode and Fastboot Mode

Boot ZTE Director into Recovery Mode

Below are the methods using which you can boot ZTE Director into Recovery Mode.

Boot ZTE Director Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Up + Volume Down and Power button together for a few seconds.
3. Release the keys as soon as you see the ZTE logo and wait for few seconds.
4. Now, your phone should boot into Recovery Mode.

Boot ZTE Director into Recovery using ADB command

1. First of all, make sure you have installed ZTE Director USB Driver and ADB and Fastboot Drivers on your Windows PC.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
3. Connect your device to PC and open Command Prompt (CMD).
4. Enter the below command to boot ZTE Director into Recovery Mode.

   adb reboot recovery

Boot ZTE Director FTM Mode

1. First of all, power off your phone.
2. Plug one end of the USB cable to PC and while holding the Volume Down button connect the other end of the cable to your device.
3. Release the keys as soon as you see the FTM Mode on your phone screen.
4. Now, your phone is booted into FTM Mode.

Related Tutorials

How to Factory Reset ZTE Director